View Dror Gluska's profile |
| https://pixabay.com/en/eye-internet-forward-vision-669157/ |
What can machines do?
This is a quick introduction about sensors, what are the available options for a beginner maker/developer.
Physical Sensing
"Sensors" such as switches, magnetic, sound (or ultrasonic), pressure, temperature, flexing (or bending), shear (or weight), piezo, gas, capacitive and resistive sensors have been around the block, simple vacuum robots have some of them, cars have them (not necessarily self driving ones, see parking sensors) and even old refrigerators have them (someone has to turn on the light when you're hungry at 4AM).Switches
Switches and buttons come in all shapes and sizes but the mechanical principle is the same, there are two (or more) spaced conductors, when a force is applied, one of the conductors (or a third) is moving toward them and makes a connection. |
| https://www.omron-ecb.co.kr/web/en/special/switch/basic02-05 |
 |
| https://www.edrawsoft.com/switch-symbols.php |
Mercury tilt switches got infamous in the movies for less favoring reasons
 |
| Source |
So what are switches and buttons good for?
Sensing mechanical contact, bumping into walls, rotational forces, etc'
What are they not good for?
Anything that requires precision and detection of the amount of pressure, they are on-off, nothing more.
Magnetic
A magnetic sensor is a type of sensor capable of sensing magnetic fields, magnetic fields are a directional field but the direction can not always be sensed, for example a reed switch will close (N.O) or open (N.C) based on the presence of magnetic field. We can also sense the presence and direction of a magnetic field with Hall Effect sensors (1D) and electronic compass if we require a 3D sensing of electric fields. |
| http://www.memsjournal.com/2011/02/motion-sensing-in-the-iphone-4-electronic-compass.html |
Since hall sensors are so inexpensive and accurate, they can be used for rotational speed detection (odometry) and water/air flow sensors.
The principle is the same for most speed sensors, a moving part and a detector.
 |
| Source |
Another very interesting application of hall sensor is 3D absolute sensing like the MLX90333:
 |
| Source |
Another type of magnetic sensing is induction sensing, this is what metal detectors do, the way they work is by generating a strong magnetic field and detecting changes in the feedback, induction sensors are used in 3D printers to detect the build plate, they are pretty accurate and repeatable, but there are better sensors for that purpose as well and they are limited by the fact that they can only sense metals.
Common usages:
 |
| Neato Boundary Sensor |
So what are they good for?
The reed switches are used as an on-off switch when a magnet is near by, the common example are windows and doors sensors for alarms. The hall effect sensors are used to precisely detect a magnetic object and the compasses are used to orient against magnetic north or artificial magnetic field.
What are they not good for?
If the environment is magnetically "dirty", many motors and magnets, both the hall effect and the compass are going to have a hard time "locking", also, electronic compasses are relatively slow, so they can not be used to keep the orientation for a moving object, for that purpose they are combined with accelerometers and gyros and their data is combined (or "fused" - see sensor fusion) to keep the robot oriented until the compass catches on.
Sound
Sound has very interesting properties with regard to robots, it bounces easily, its travelling relatively slow and sound sensors are abundant (microphones for example).These leads us to a very simple implementation: distance sensors, they send a ping, wait for the response and report the time it took, Mechatronics has a nice tutorial.
Another very interesting usage is direction detection, I've seen 3 mic arrays, 6 mic arrays and they come with SDKs and can do noise reduction and direction detection.
Another interesting use for ultrasonic sound is indoor navigation, in theory, one can triangulate the source of a sound pulse by the time it takes to get to the transceivers.
Thanks to Marvelmind its no longer a theory:
Common usage would be distance sensors, atomizers, voice commands.
So what is it good for?
When you need to detect distance to a flat surface (rememebr, sound bounces..), when you need to reduce noise in a noisy environment or when you need to detect the direction of where the sound is coming from.
What is it not good for?
When the surfaces are not perpendicular to the sensor, sound will bounce all over the place, you should be thankful for any reading.
Interesting libraries:
Pressure
Pressure sensors are useful for many things, for hydraulic systems they can detect leaks, for water systems they can detect presence or water pump quality or even regulating pressure with a PID loop. |
| Water Pressure Sensor |
Water pressure sensors can detect depth in submersible robots.
 |
| 300m Depth/Pressure Sensor |
Air Pressure sensors are also very useful for weather stations as they can detect weather fronts and predict rain.
Air Pressure sensors can also help multi-rotors keep a certain height, not accurately though, but good enough. Just don't count on them to work on bad weather, I've seen a multi-rotor drop 10 meters on a bad weather day and go back up in a blink of an eye, you can't blame the electronics..
A common type of air pressure sensor is the BMP280:
All pressure sensors measure from a certain reference point, gauge, absolute and differential are relative and you should know what you need.
Make sure the pressure sensor is suitable for your medium and amount of stress its going to take, note the breakdown pressure so no one will lose an eye/finger and if dealing with high pressure, a suitable burst valve is always recommended.
Temperature
Temperature sensors are useful in cases when you need to know the temperature, for example, is your motor running hot? did the water boil already? is the oil too hot? is the printer's hotend at the right temperature? is it hot outside?Like all other sensors, temperature sensors come in different flavors, but they divide into 2 groups: conduction and radiation sensors.
A common air/weather convection temperature sensor is the DHT11 and DHT22, these are very cheap:
A common type of conduction temperature sensor is the NTC 100k thermistor
Two consumer grade companies makes these sensors, Seek and FLIR, both cost around $200 for the cheap versions and of-curse you can get sensors only, but that is a different adventure.
Another kind of temperature sensor is the thermostats, which can be used for thermal protection, no sensing, just turn on the fan when its too hot, or turn off the power. they are not accurate but they do a good job for their designed purpose.
I've used the KSD9700 to quiet down a power supply that had a fan always on:
Lastly the PTC thermistors, they are a type of resistor that when they get too hot, their resistance jumps significantly, they are used to protect over-current and are regarded as self resetting fuse as the system cools off, the power returns to normal.
This is a nice kit to get started:
Flexing
Flexing (or bending) sensors are basically resistors that change their resistance when they are bent, they are great for human interaction since, if you think about it, we have many joints that flex and tracking these flexing movements is not trivial by other means, so gloves, sleeves, tights, if it bends, you can detect it with these little sensors.Be careful though, these sensors are not cheap and the material melts away if attempting to solder it, you might be able to fix it with conductive silver paint, avoid heat as much as possible and avoid rubbing it in the exposed areas.
Here's a 2.2" flex sensor, they come at various lengths:
Shear / Load Cell / Weight
Shear beam, Load Cells and Weight sensors all come fromt he same family of sensors, they change resistance according to the deformation that is sensed in the metal. They are used in scales and testing machines. One might want to use them to test a load on a mechanical arm for example so they can stop a motor if the weight becomes dangerous or avoid breaking something if an arm is attempting to open a door.Here's an example of a 10KG weight sensor:
Piezo
Piezo sensors have many uses, a piezo crystal is either flexing when power is applied to it, thus can make a sound or it can generate power when a force is applied to it. due to these features piezo are versatile.Piezo have been used as microphones, especially where vibration plays a big role, for example, as a guitar pickup microphone.
 |
| Source |
Since piezo generate power on change, they can be used to detect "knocks" (or bumps or clicks) or even heartbeat!
Gas
Gas sensors mostly split into two groups, spectroscopic sensing and chemical reaction sensing. while spectroscopic have a very long life, the chemical reaction ones have a relatively short lifespan and the catalyst will eventually deplete and no longer detect anything or detection accuracy will be low enough to make it useless.
Another type gas sensor is dust sensor, such as GP2Y1014AU0F:
 |
| Source |
CO2 sensors for example, come in a few different ways, for example, chemical (MG811) and spectroscopic (MH-Z19):
 |
| MH-Z19 - NDIR sensor |
 |
| MG811 - Chemical Sensor |
Other types of sensors are
Combustible Gas ( LPG, Propane, Hydrogen, Methane and other combustible steam) - MQ-2
Alcohol/Ethanol and Benzine - MQ-3
Combustible gas (Methane, Propane and Butane) - MQ-4
LPG, natural gas , town gas - MQ-5
LPG, iso-butane, propane - MQ-6
CO - MQ-7
Hydrogen - MQ-8
LPG, CO, and Methane - MQ-9
Ozone - MQ131
Ammonia, nitrogen oxide, alcohols, aromatic compounds, sulfide and smoke - MQ-135
Hydrogen sulfide - MQ136
Ammonia - MQ137 Hydrogen sulfide - MQ136
Toluene, Acetone, Ethanol and Formaldehyde - MQ138
Freon - MQ139
Methane LPG, i-butane, Propane - MQ-214
Alcohol - MQ303A / MQ303B
CO2 Low Power - MG-812
Natural gas, LPG, Coal gas, alkane ect combustible gas, and gasoline, Alcohol, ketone, benzene ect organic solvent - MC113
CO2 - MG811
Methane - MP7217
Alcohol,smoke,formaldehyde, toluene, acetone, benzene, lighter gas, paint - MP901
Formaldehyde - ME3M-CH2O
Ammonia - ME3-NH
Organic Solvent Vapors - TGS822
Carbon Monoxide - TGS2442
Air Contaminants - hydrogen and carbon monoxide - TGS2600
Air Contaminants - odorous gases such as ammonia and H2S - TGS2602
Air Contaminants - odorous gases such as amine-series and sulfurous odors - TGS2603
LP gas - TGS2610
Methane - TGS2611
Solvent Vapors - TGS2620
Carbon Monoxide - TGS2442
Carbon Dioxide - TGS4161
Carbon Monoxide - TGS5042
VOCs gases (toluene, formaldehyde, benzene, ect.) - MS1100
Methane Butane Hydrogen - MR511
Most combustible gases and vapors - CLE-0951-400
Nitric Oxide - 4NO-2000
Oxygen - O2-A2 / AO2 / 2FO-N / KE-25 / ZE07-CO / ME2-O2 ME3-O2 / 4OXV O2 / ME3-C2H4O / OOM201
So there's practically a sensor for almost any need, most of them are decently priced.
So there's practically a sensor for almost any need, most of them are decently priced.
Resistive
In general, resistive sensors are a large class of sensors, among them are the previously written topics of load cells, flexing, temperature and various pressure sensors, they property of the material changes conductivity based on the forces and temperatures applied on them, some of these sensors need some kind of temperature compensation as resistance changes with temperature as well.Other types of resistive sensors are resistive touch screens, which work by changing the resistance with the force and place the mechanical stress is applied, that's why they work best with a stylus since a finger might apply force on more than a small location, thus changing the sensed resistance and eventually leading to bad localization. Another problem with resistive touch screens is temperature which affects accuracy.
In the end resistive touch screens were abandoned but that technology is not completely useless, here's an example for a foot pressure point sensor:
Resistive sensors can also detect rotation angle, for example, potentiometers, and slide, as slide potentiometers.
Analog servo motors use potentiometers, but the same principle applies, you can use a multi turn potentiometer to achieve multiple turn servo!
 |
| Source |
 |
| Linear Servo |
Capacitive
Capacitive sensors work by detecting conductivity different than air which makes them useful for many things and they don't suffer from the same problems resistance sensors.Common usage is touchpads, phone screens, touch buttons, capacitive proximity sensors and capacitive soil moisture sensor which doesn't corrode as easily as resistive ones.
 |
| Capacitive Touchpad http://www.cirque.com/capacitive-touch/ |
 |
| Touch Sensor |
 |
| Soil Moisture Sensor |
 |
| Proximity Sensor |
Current/Voltage
Current sensors/voltage sensors are very important to keep a limited system within the power supply's boundaries or keeping a Lithium battery alive when the power runs out, so the battery voltage won't get below 3.2v (or its limit) per cell.DC Voltage sensing can use a very simple voltage divider. and AC Voltage can use the same principle except that we need to put a rectifier in front of it.
 |
| Source |
 |
| Non-invasive AC current sensor |
 |
| 100Amp AC/DC Current Sensor Module Board, based on ACS758 |
Biological
Biological sensors are useful for detecting or authenticating a person, so if your robot depends on someone's pulse or blood oxygen level, you can use a pulse oximeter for that, its a non invasive sensor that measures the difference between IR and red light absorbance of skin. |
| MAX30100 Pulse Oximeter |
Another thing someone might want to sense is muscle/heart/brain signals, which can be done with EMG/ECG/EEG sensors.
 |
| Muscle Signal EMG Sensor |
 |
| ECG module AD8232 |
 |
| 8bit EEG brain wave module -8 Channel |
Fingerprints, lately it seems fingerprint sensors are all over the place, you can get them very cheaply and in various sizes. A very fun project I've seen someone do is build thor's hammer with fingerprint reader.
 |
| FPM10A Fingerprint Reader Sensor |
